Fleischmann TURN-CONTROL 6915 Instructions De Service page 35

1721_Betra_21_6915_0101.qxd
selection by pressing the red knob.
The next step is to synchronise the position of the
bridge hut in the display with the actual current
position of the bridge hut on the turntable on the
layout.
In menu option CnF, rotate the red control
knob until the bridge is in the current
position.
Press the red knob to confirm this selection.
The display will now automatically switch to the
SEL menu option.
Now you will be able to access all bridge
positions "step by step" (with each rotation of the
red knob, the bridge will turn to the next available
track exit, or rest setting) in accordance with the
way you have turned the red knob.
In our example, however, we will start from the
bridge position shown in Fig. 7.
A new feature that you will now be aware of are
the two arrows on the bottom right of Fig. 7. You
can now determine which of the active track ends
27.09.2007 12:15 Uhr
should be live – either the bridge hut side (left
arrow) or on the opposite side (right arrow).
The selection is made using the green key
beneath the symbol <-->.
For the purpose of our example, we will select the
left side (= bridge hut side as the live side).
Fig. 7 Selecting the live track end side
Press the green key until only the left arrow is
visible.
Seite 35
< > - -
35