Fleischmann TURN-CONTROL 6915 Instructions De Service page 25

1721_Betra_21_6915_0101.qxd
6915 TURN-CONTROL
Turntable Controller
Operating instructions
Contents
1. Safety Warnings and Advice on Use
1.2. Components, operational elements and
connections
2. Operation
2.1 Connection to the Layout
2.2 Connection to a transformer
2.3 Operation and Menu Options
2.4 Using the controller
2.5 Play mode
2.6 Special Functions
3. Digital Operation
4. Appendix
27.09.2007
Page
GB
26
27
29
29
31
32
36
40
42
46
48
12:15 Uhr Seite 25
Dear Railway Modeller,
Thank you for deciding to purchase the TURN-
CONTROL turntable controller
FLEISCHMANN. The controller can be used for
any of the FLEISCHMANN turntables (as well as
Märklin* 7286) either in DC powered or digital
systems and even in 3-rail AC layouts, so that you
can pre-select your desired turntable exit tracks
and automatically rotate the turntable to them.
The TURN-CONTROL can even be operated by
DCC equipment or via LocoNet connections.
You won't need to make any alterations either to
the layout or directly to the turntable itself.
In this operational manual, we will describe, step
by step, all you need to know about how to install
and how to use, (i.e. connection to additional
turntables) the TURN-CONTROL controller on
your layout.
The FLEISCHMANN-Team wish you many hours
of enjoyment with your new controller.
* Märklin is a registered trademark of the Company of Gebr. Märklin&Cie GmbH, Göppingen
6915 from
25