Viesta I2Z Manuel D'utilisation page 17

KEN001AKI
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will beep and the timer indicator will
show "- - " when the set time finished.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 3#)
2. Touch timer control , The minder indicator
will start flashing and "30" will show in the
timer display.
3. Set the time by touching the or control of the
timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
[English]
[ 17 ]
18.09.2017 • v09