Device Power Management (Tracker For Android Only); Reducing Power Consumption - Tracker G400 Manuel D'utilisation Rapide

6.2. DEVICE POWER MANAGEMENT (TRACKER FOR ANDROID ONLY)

Power consumption is the sum of many factors: set the frequency of trac-
king, outside temperature, network signal strength, power facilities, as well
as set the 2G/3G network mode. The factory settings collar battery life is
adequate, and usually does not require special action. However, it is good to
understand which factors affect the power consumption if you will need to
extend battery life.
Device Configuration Commands > GPS / GSM settings - can be found in
the dog menu – and control the operation of the device as well as power
consumption.
• Full power mode - GSM and GPS run all the time.
• Tracker Smart mode (only part of the device), the device will adjust the
consumption according to tracking settings on the basis of an intelligent
power consumption. This is the standard setting. This is achieved by holding
regular use significantly longer battery life. Smart mode achieves already
significant results, if tracking interval is longer than 20 seconds.

6.3. REDUCING POWER CONSUMPTION

For example, a dog got stuck on a difficult place to reach and it will take
several hours to get there. If you want to ensure battery supply for the night
and want to reduce the power consumption, follow these steps:
• Set longer period tracking frequency e.g. 15-30min
• Answer "YES" to the question, in case some comes.
Now the device will put GPS receiver on standby for the time between the
positioning interval and consumes less power. The device will stay logged in
24