Collar's Standard Settings - Tracker G400 Manuel D'utilisation Rapide

on. Take the device outside or to a place with a clear sky view for faster
reception of GPS and Glonass Satellites.
1. Turn the device on, leave the device outside until only the green light starts
to blink, then wait about 5 minutes
2. In order to add a device into your phone, click ...
ANDROID: select targets > + > "Add a new GPS locator" > Search by serial
number
iPHONE & iPAD: select
3. Follow the information on the screen
At the end of the registration, type the share name, phone number, and
passwords of your device into the table at the end of this manual. Fill in all
your registration detail into the table. You will find the information in [device
name] > Live- and display settings

4.3. COLLAR's STANDARD SETTINGS

The following settings are set as the factory default settings. They will au-
tomatically turn on every time you turn the power switch on, no matter what
mode the set is set for the previous use.
GSM/GPS Power
Live-tracking
AGPS Offline
AGPS Online
settings > targets > "+" > Search by serial number
Tracker Smart
1 min
while starting
when expired
17