Charging - Tracker G400 Manuel D'utilisation Rapide

You can change the tracking frequency in Tracker Apps. You can change
other settings in Tracker for Android under Configuration commands menu. If
you want to save power, use less frequent tracking and avoid unnecessarily
long, frequent tracking. E.g. 10 s tracking consumes much more power than
the 1 or 5 minutes tracking.
The Setup Commands menu in Android App also contains the "Restore to
Standard Settings" button. This command will test the operation of the
device, sets the standard settings and finally restarts it. This function can be
used to restore the default settings.

4.4. CHARGING

The device should always be fully charged before use. The device is rechar-
ged using the supplied mains charger. The device can also be charged using
the car charger available as an accessory. The device turns on red lights
indicate charging. When the recharging is ready, devices LED flashes only the
green light. The device can also be charged while being turned on. Current
charging status of the battery 0-99% is displayed in Tracker Apps.
Your battery is a modern lithium-polymer battery technology and can be
recharged without worries, such as your cell phone battery, regardless of its
current level. The battery does not need to be calibrated from time to time in
order to maintain its performance. During a longer storage is recommended
that the battery contained approximately 50% charge level.
18