Advanced Operations; Bark Calculator Adjustment - Tracker G400 Manuel D'utilisation Rapide

6. ADVANCED OPERATIONS

6.1. BARK CALCULATOR ADJUSTMENT

The integrated microphone listens and calculates the intensity of dog's
barking rate which is than displayed in the app. If the device hits some
branches, bushes etc., it can cause noise problems, which can the device
misinterpret as barks. This can especially occur, if the counter is provided for
low toned dog, according sensitive. In order to minimize the amount of false
barking detection, it is essential to adjust the strength of the barking counter
which suits your dog's voice the best.
The device has four different basic settings selectable by the user according
to the dog's barking volume: Low, Medium, Loud and Very Loud. Dog the
proper setting must be applied experimentally for example, the dog while dri-
ving game or barking a game in one place. In this case, try to set the loudest
setting, which still counts the barking peaks still correctly.
If the standard counter basic settings are not sufficient, you can adjust the
entire scale to be more sensitive or less sensitive with the command Adjust
barking counter scale.
The program shows two barking rates: over the last 60 seconds and in the
braces for last 10 seconds. In addition, on the info screen you will find the
bark frequency (barks per min) and the bark counters.
Note: Your microphone hole is being protected by rubber sim door. The flap
should remain the same way, so that the microphone sound pressure levels
remain the same.
23