Introduction; Definition Of Signal Warnings And Symbols - OHAUS STARTER 300C Mode D'emploi

STARTER 300C Portable Conductivity Meter
1

INTRODUCTION

Thank you for choosing OHAUS. Please read the manual completely before using the STARTER
300C portable conductivity meter to avoid incorrect operation.
The STARTER 300C has an excellent performance/price ratio and is designed with many useful
features. Other accessories such as electrodes, conductivity standard solutions are also available.
Starter 300C offers many practical features such as:
 Ergonomic, multifunctional design for ambidextrous measurements or table top use
 Integrated labeling design for quick product identification
 IP54 protection against dust and water
 Ohaus' renowned user friendly software
1.1

Definition of Signal Warnings and Symbols

Safety notes are marked with signal words and warning symbols. These show safety issues and
warnings. Ignoring the safety notes may lead to personal injury, damage to the instrument,
malfunctions and false results.
Signal Words
WARNING
CAUTION
Attention
Note
Warning Symbols
General hazard
Explosion hazard
Corrosive hazard

Alternating current

Direct current
For a hazardous situation with medium risk, possibly resulting in
injuries or death if not avoided.
For a hazardous situation with low risk, resulting in damage to the
device or the property or in loss of data, or injuries if not avoided.
For important information about the product.
For useful information about the product
EN 1
-