Integrated Stand For Table Top Use; Setup; Set Temperature Unit; Set Mtc Temperature Value - OHAUS STARTER 300C Mode D'emploi

EN-6
2.5

Integrated stand for table top use

Starter 300C has an integrated table stand as shown, which can be pushed out to use the meter
on a lab bench or desk. To close the stand, push the middle edge of the stand toward the meter.
3

SETUP

3.1

Set temperature unit

 Power the meter on by pressing
 Press and hold
temperature unit blinks. (° C or ° F)
 Use
 Press button-
Note: ° C = 5/9 (° F -32)
Continue with MTC temperature value setting by following instructions or press button-
back to the measurement screen.
3.2

Set MTC temperature value

After the temperature unit setting, the meter goes to setup the MTC temperature value setting.
Use or buttons to adjust the value.
Press button-
Continue with calibration standard setting by following instructions or press button-
back to the measurement screen.
until the setup icon
or buttons to select the temperature unit.
to confirm your setting.
to confirm your setting.
STARTER 300C Portable pH Meter
.
appears on the display and the current
to go
to go