Tintometer Lovibond SD 315 Oxi Mode D'emploi page 41

Set instrument: Instrument settings
Set logger: Setting of the logger function
(Func =
CYCL)
(*) If data are stored in the logger memory, the parameters marked with (*) cannot be called up. If these are to be chan-
ged, the saved data must fi rst be deleted!
SD_315_DO_1 06/2020
Auto hold:
Automatic determination of measurement value
on Automatic defi nition
of the measurement value
oFF Defi nition of the measurement value
by button press
Auto Power-Off:
Automatic instrument shut-down
1 ... 120 Automatic shut-down of the instru-
ment when not in use, in minutes
oFF Automatic shut-down deactivated
(permanent operation)
Background lighting
oFF No lighting
5 ... 120 Automatic shut-down of the lighting
in seconds
on Lighting always on
Setting of the time
HH:MM Hours:minutes
Setting of the year
YYYY Year
Setting of the date
DD:MM Day:Month
Selection of the logger function
CYCL Cyclic: cyclical logger
Stor Store: Individual value logger
oFF No logger function
0:01... Cycle time in minutes:
60:00 Seconds in which a data point is
recorded.
*
*
*
*
41