ION SLIDES 2 PC Guide D'utilisation page 6

USING THE SLIDES 2 PC
For first time users, do NOT plug the image copier into computer while the holder is inserted in the image
copier. Please remove the film / slide holder before connecting to the computer, and click "calibrate" button to
perform calibration the first time the image copier is used.
1
Plug the USB cable of the SLIDES 2 PC into your computer's USB2 port. Once connected the power LED
light will be red.
2
Insert the loaded film / slide holder properly into the slot as shown.
(Insert through front entrance)
4
Click "Get Photo" and choose "Acquire from
Scanner".
5a
Please note that if you want to scan black-white
film, you should choose "B&W Negative" film type.
5
Verify selected device is "33MM Scanner" and
select the location to save your pictures.
"Acquire".
5b
There are two available output formats for your
photos: JPG or TIF.
6
3
Click on the PhotoImpression
6 icon on the desktop and
you will see the following.
Click