Marking; Connections - Interacoustics MT10 Instructions D'utilisation

2.3 Marking

The following marking can be found on the instrument:
Symbol
0123
Label to be found in the battery compartment beneath the battery.

2.4 Connections

Infrared adapter (the MT10 has been tested with Actysis ACTIR2000U USB adapter and it is
recommended by Interacoustics to use this device).
MT10 Instruction for Use - English
Date: 2012-05-01
Explanation
Type B applied parts.
Patient applied parts that are not conductive and can be immediately
released from the patient.
Refer to instruction manual
WEEE (EU-directive)
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collection facilities for recovery and recycling.
The CE-mark indicates that Interacoustics A/S meets the requirements of
Annex II of the Medical Device Directive 93/42/EEC. TÜV Product Service,
Identification No. 0123, has approved the quality system.
The number next to the symbol indicates the year of manufacture.
Do not re-use
Parts that are marked with this symbol are for single use only.
Page 4/16