Hoppe AutoLock Notice De Montage Et D'utilisation page 31

authorisation and that the window can no longer be opened following
the next time that it is closed, e.g. because the time frame set for re-
lease has been exceeded.
Error signals
The LED flashes red five times
Possible causes:
• Programming procedure could not be completed
• Smart home central control unit not active
• Smart home central control unit and eHandle AutoLock for win-
dows cannot communicate
Actions:
• Check whether the smart home central control unit is functioning
correctly
• Reprogram the eHandle AutoLock for windows
The LED flashes red twice
Cause: Reed relays defective
Action: Please check whether the eHandle AutoLock for windows is
mounted correctly.
If the signal continues to appear, please contact the distributor/instal-
lation company from which you purchased the eHandle AutoLock for
windows.
The LED flashes red twenty-five times
Cause: Handle cannot be mechanically unlocked or locked.
Action: Move handle to the 0° position.
If the signal continues to appear, please contact the distributor/instal-
lation company from which you purchased the eHandle AutoLock for
windows.
"Battery low" display
The LED flashes orange
Cause: Battery is low.
Action: Replace the battery at the next opportunity (see Section 11).
31