Publicité
Les langues disponibles
Les langues disponibles
Thread keeps
breaking
Stitches too loose
or
uneven
Breaking needle
The instructions state the substance of
the following:
-Switch off or unplug the appliance
when leaving it unattended
-Unplug the appliance before carrying
out maintenance or replacing lamps
ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your
local authorities about the places where you can return this product. In fact,
electrical and electronic products contain hazardous substances that have harmful
effects on the environment or human health and should be recycled. The symbol
here indicates that electrical and electronic equipment should be chosen carefully,
a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 01
Needle bent
Needle shank not properly
seated
Thread tension dial, thread
guide or thread pulling bar
too tight
Thread blocked by upper
bobbin
Upper thread too tight or lower
thread too loose
Needle bent or deformed
Presser foot too loose
Pull fabric with force when
sewing
Needle not lowered into fabric
when start sewing
Remove and re-insert a
new needle
Remove and re-insert a
new needle
Loosen the thread tension
between 3-5 number
Pull out the spool pin and
make the bobbin or thread
run smoothly
Remove and reinsert a
new needle
Remove and reinsert a new needle
and screw tight
Remove and reinsert a new needle
and thread again
Remove and reinsert a new
needle, thread again, turn hand
wheel to lower the needle into
fabric, and then start sewing.
P
P
P
Publicité
