weasy SW45 Manuel D'utilisation page 10

from the sewing machine. (Fig.21).
7. Cut the thread using the thread cutter. (Fig.22).
Warning: When the sewing machine running, please do not touch the pattern
selection dial
FEATURES
SELECTION STITCH PATTERM
This machine has 12 kinds of thread stitch patterns, three kinds of straight lines,
seven kinds of zigzag stitch, two kind of locking buttonhole stitch. See the stitch
patterns drawing. Rotating the stitch patterns dial to select the stitch pattern you
wanted.
MANUAL BUTTONHOLE
1. Put cloth under presser foot and press down the presser foot on the cloth where you need to sew
buttonhole, then choose the 12
2. Turn on the switch and sew 3-4 stitch in low speed, then turn off switch (Fig.23).
3. Choose the 11
th
stitch, turn on switch and sew on the cloth in suitable length, then turn off switch.
Note that try to keep sewed stitch in straight line (Fig. 24).
4. Raise the presser foot, turn the cloth head back (because cloth is sewed forward, if you want to sew
buttonhole, you need to turn the direction of sewing.) (Fig. 25).
5. Choose the 12
th
stitch, then turn on the switch and sew 3-4 stitch on low speed, then turn off
switch. (Fig. 26).
6. Choose the 12
th
stitch, then turn on the switch and sew till buttonhole is over sewed fully, then
stop sewing (Fig. 27).
th
stitch.