weasy SW45 Manuel D'utilisation page 13

3. Lower the presser foot and follow the regular sewing instructions.
DARWER
This drawer is a accessory storage compartment.
THRAED CUTTER
It has a thread cutter on the central left side of machine; it can cut off the thread after
sewing or winging thread.
TROUBLE SHOOTING GUIDE
Problem
No power supply or
the machine
runs slowly
Skipping stitches
Bobbin thread
cannot be
drawn up
Problem cause
Batteries are installed
incorrectly
Batteries are low
Adaptor power inadequate
Needle eye not in the
middle
Needle bent
Presser foot too loose
Lower thread has been
used up
Needle threaded incorrectly
Amendment
Reinstall the batteries
making sure they are the
correct way around
Use new batteries
Use compatible adaptor
Remove and re-insert the
needle with the flat side of
the needle to the back
Remove and re-insert a
new needle
Tighten the presser foot
Replace with new full
bobbin
Re-thread the needle,
making sure it is threaded
from the front to the back