At A Glance (Reverse) - ADE CK 1710 Mode D'emploi

BEWARE of material damage
‚ Protect the clock from strong impacts and vibrations.
‚ Remove the batteries from the clock, if these are used up or you are not going to
use the clock for a long period. You will thus avoid damage that may result from
the leakage of battery acid.
‚ When inserting and changing batteries, pay attention to the correct polarity (+/-).
‚ Do not subject the batteries to extreme conditions by, for example, storing them
on heaters or under direct sunlight. Increased risk of leakage!
‚ Clean the battery and device contacts, as needed, before inserting the battery.
‚ Do not make any modifications to the item. Only allow repairs to be carried out at
a specialist workshop. Repairs carried out incorrectly can considerably endanger
the user.

At a glance (reverse)

1 M.SET button – Set the time manually
2 RESET button – Reset the clock to factory settings
3 REC button – Restart the radio transmission
4 Locking pin for transport
5
Button : Night light testing
6 ON/OFF switch: Automatic switching the night light function on and off
Radio Wall Clock CK 1710
1
6
2
Safety
3
4
5
15