Philips HD2647 Mode D'emploi page 10

EnglisH
10
Problem
The toaster does
not work.
Bread gets stuck in
the appliance.
The toast is too dark/
too light.
Smoke comes out of
the toaster.
The mains cord
is damaged.
The bread pops up
almost immediately
without having been
toasted
I cannot change the
browning level when
I use the warming
function.
Only one side of
my roll or croissant
is warm
Solution
Make sure the plug is properly inserted into the wall socket.
If the toaster still does not work, take it to a service centre authorised
by Philips for examination.
Unplug the appliance and let it cool down. Carefully remove the slice or
slices from the toaster. Take care not to damage the heating elements
when you remove the slice or slices of bread. Never use a metal object
for this purpose.
Check the browning setting selected for toasting. Select a lower setting
next time if your toast is too dark and a higher setting if your toast is
too light.
You have chosen a too high setting for the type of bread inserted.
Push the stop button to stop the toasting process.
If the mains cord of this appliance is damaged, it must always be
replaced by Philips, a service centre authorised by Philips or similarly
qualified persons in order to avoid a hazard.
Make sure you push down the toasting lever all the way. If the bread still
does not stay down, take the appliance to a service centre authorized
by Philips for examination.
This is normal, for the toaster has a fixed temperature setting for
warming up rolls and croissants, which guarantees a perfect end result.
Turn your roll or croissant and warm it up again. Follow the instructions
in 'Warming up rolls and croissants'.