Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
APPLICATION
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The HAUSSMANN 4-1/2" angle grinder is intended for cutting, grinding and brushing
metal and stone materials without using water. For cutting stone, a cutting guide is
required.
Check the package contents
Carefully remove the tool from its packaging and check if the following parts are
present:
-- 4-1/2" Angle grinder
-- Auxiliary handle
-- Retainer mounting flange and clamp nut
-- Two-pin spanner wrench
If any parts are missing or damaged, please contact Customer Service at the
number indicated on the front page of this Manual.
Product Features
The numbering of the product features refers to the illustration of the tool on the
graphics page(p.1-2).
1. On/Off switch
2. Auxiliary handle
3. Spindle lock
4. Spindle collar
5. Spindle
6. Guard release/Lock latch
7. Wheel guard
8. Retainer mounting flange
9. Grinding Wheels/Cutting Discs
10. Clamp nut
TECHNICAL DATA
Product code
Model number
Voltage rating
Current rating
No-load speed
Spindle thread
Max. disc diameter
59595062
S1M-KM8-115-1
120 V AC / 60 Hz
6 amp
11,000 RPM
1/2" (12 mm)
4-1/2" (115 mm)
8
Publicité
Chapitres
Table des Matières
