Fritel QUALITY Série Mode D'emploi page 8

INSTRUCTIONS OF USE
CAUTION: NEVER put the blender onto a wet surface or a wet cloth. NEVER let the motor block get in contact with
any liquid. If however, this would occur, immediately pull out the plug from the socket and bring the appliance to a
recognized expert.
Use only wooden, rubber or plastic cooking utensils. NEVER use force to push food down into the jug or to remove
food from the knives.
Grinding meat or coffee beans, beating up egg white, making dough and chopping chocolate is not possible with a
blender.
CAUTION: NEVER put your hands or any sort of cooking utensils into the jug, while it is placed onto the motor block.
Tips for preparing food
-First add the liquids to the jug. Cut the solid food (vegetables, cheese, seafood,...) in chunks of +/-2cm. Don't
overburden the motor by using to many or to solid ingredients. If the motor jams, immediately put the blender in the
OFF position to prevent the motor from overheating and let it cool down.
-Blend the ingredients only for a few seconds at a time. Repeat this a few times. If you blend for a longer period of
time at once, you may get a mushy result.
SELECTION OF THE SPEED
Put the switch either on position 1 to 6 or 7 to 12. The hardness of the ingredients will determine to a large extent
which position to use. The "pulse" function can only be used, when the switch is on the "0" position. The motor will run
as long as you keep the switch onto the "Pulse" function. As soon as you will release it, the motor will stop.
SELECTION "ICE CRUSH FUNCTION"
This button must always be used in combination with the speed control button. First turn the speed control button to
the desired position and then briefly press the ice crush button for an extra powerful blending.
USE OF THE "PULSE" FUNCTION
Fill up the jar with maximum 10 ice cubes and close up the jar with the rubber lid. Push the ice crush knob for 1
second at a time and repeat until the desired result has been reached.
Position Switch
Ice Crush Function
Ice Crush
Slow 1 -6
Slow 1 -6
Fast 7 - 12
Fast 7 - 12
WORKING WITH A BLENDER
CAUTION: NEVER use the blender for more than 60 seconds at a time when blending solid ingredients.
1. Add the ingredients to the jug.
CAUTION: NEVER use warm of hot ingredients. Precooked ingredients need to cool down before they can be
added to the jug. Don't overload the jug, as it may overburden the motor.
2. Place the lid onto the jug and press firmly to make sure it is securely closed. Close the opening in the lid with the
measuring cap. Place the measuring cap in the predesigned grooves and turn it clockwise to secure it.
3. Place one hand on the lid and switch on the appliance with the other hand. Choose the desired speed. The motor
will start.
CAUTION: If the motor slows down or doesn't work at all, immediately switch off the appliance and let it cool down.
If this doesn't help, go to a recognized expert.
4. After use, switch off the appliance by putting it on the OFF position.
5. As soon as the knives have stopped turning, you can take off the jug from the motor block. Take the lid off to
control the content of the jug or to stir or push in new ingredients.
If you wish to add more ingredients, you can also remove the measuring cap from
the lid. Then place the measuring cap back in its position.
6. Take the glass jar from its base (motor block) and take the lid off. Liquids can be poured directly from the jar.
Function + example
Crush
Mix butter/margarine
Mash
Preparation of baby food
Mix soup
Milkshake, smoothies, juices,...
Make mashed fruit
Use:
ice Push the Ice crush button until the
desired result is reached
Boil the food, then blend it with
sufficient fluids.
First add the liquid, then the other
ingredients.
Get a smoothie result
Cut the fruit in chunks of +/-2cm and
blend them.
8