Teka LI4 1270 E Manuel D'instructions page 13

4.11 SELECTING AND CONFIRMING OPTIONS
Option selection
1. The Option Selection button can be used to select the following options in sequence (from the top down):
Prewash: adds a stage before the main wash, lasting about 20 minutes at a temperature of 35°C. Suit-
able for loads of particularly dirty items.
Intensive: the max. temperature is changed to 60°C and the washing stage is extended to increase the
effectiveness of the enzymes in the detergents. Suitable for delicate but dirty items.
Easy iron: produces items which are less creased and easy to iron.
Water plus: Increases the amount of water used for washing and rinses.
In alternative Extra rinse: this option adds a rinse to the selected washing programme.
Rapid: reduces the duration of the washing cycle. Suitable for small amounts of laundry with only light
dirt.
Buzzer: sets whether or not the buzzer will sound at the end of the cycle. The appliance comes with the
buzzer function "on".
2. To confirm the selected option, simply press the Confirm options button and the LED of the option re-
mains on.
3. To delete an option selection, simply return to the option with the Selection button and press the Confirm
options button. To annul all the options previously selected in a single operation, simply hold down the
Confirm options button for 4 seconds.
4. The Buzzer option retains its "on" or "off" status for subsequent cycles. It is only automatically switched
to "off" if the Night Wash programme is chosen.
Options
Confirm option
EN
Start Pause
12