KERN EMB 200-3V Mode D'emploi page 75

+
Density determination "solids"
 Hang the sample on the suspension device.
 Press
and the weight of the sample in air is shown.
 If possible, immersed the sample bubble free in the aid liquid. Make sure that the
sample is at least 1 cm immersed and doesn't touch the glass beaker.
 Press
and for a short time the weight of the sample in the aid liquid is
displayed.
 The scale determines the density of the solid.
Wait until the result is displayed.
When connecting an optional printer, press
example chapter 8.2.1.
Using the balance returns into the weighing mode.
EMB-V-BA-e-1422
(example)
(example)
(example)
to print the result, see printout
25