Seko K500 TB Manuel D'installation page 45

Archive empty
First record
Last record
Date/time
K1) View data
This programming step allows the user to view the data in tabular format, as long as the archive is
not empty. Three options are available:
First record>>>
Last record>>>
Date/Time>>>
Use the UP and DOWN arrows to scroll through the archive. The scrolling will stop once the first
or last record has been reached.
K2) Setup
This programming step uses 4 functions to establish the data saving logic:
STEP
This function defines the saving interval and can be programmed from 0 to 99 minutes, in
increments of 1 minute. By default, this value is set to 0 minutes, and is therefore disabled.
ARCHIVE TYPOLOGY
Cyclical "
Fill " " Archive: once full, record storage will cease
OCCUPATION
Indicates the percentage of memory which is already occupied by saved data.
FORMAT MEMORY
Deletes all of the data stored in memory.
0000137221
(K1)
View data
ENTER
Setup
4.10 VIEW DATA
>>>>
>>>>
>>>>
ENTER
4.10 VIEW DATA
21/04/05 14:38
22.0 NTU
+027
The data will be displayed starting with the first saved record and listed in
chronological order
The data will be displayed starting with the last saved record and listed in
reverse chronological order
The data will be displayed starting from a date and time set by the user
" Archive: once full, the oldest records will be overwritten with the new records
4.0 ARCHIVE
ENTER
Are you sure?
4.10 VIEW DATA
First record
UP
Last record
Date/time
DOWN
ENTER
4.10 VIEW DATA
26/04/05 14:38
22.0 NTU
+028
CAUTION
Rev. 3.1
(K2)
UP
4.0 ARCHIVE
View data
Setup
DOWN
ENTER
4.20 SETUP
Step
ENTER
Archive type
Occupation
Format memory
4.10 VIEW DATA
>>>> First record
UP
Last record
>>>>
Date/time
>>>>
DOWN
ENTER
4.13 DATE/TIME
View
Date
Time
1 min
--->
3 %
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
44