Routine Maintenance - Efco SAi 60 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
Authorized Service Center;
-
each time the machine is left unattended;
-
before checking, cleaning, or working on the
machine;
GB
after hitting a foreign object. Check for any
-
damages and make the necessary repairs before
using the machine again;
-
when the machine is not in use.
CAUTION: Always remember that incorrectly used electric
blowers may be disruptive to others. To respect others and the
environment:
-
Avoid using the machine in places and at times that may
be disruptive.
-
Strictly comply with local regulations for the disposal of
waste material.
-
To avoid the risk of fire, do not leave the machine on leaves
or dry grass when the motor is hot.
-
Strictly comply with local regulations for the disposal of
damaged par ts or any element with a strong
environmental impact.
WARNING! Long-term exposure to vibration can cause
injury and neuro-vascular disorders (also known as "Raynaud's
phenomenon" or "white hand" phenomenon) especially to
those suffering from circulatory disorders. Symptoms can affect
the hands, wrists and fingers and manifest with loss of feeling,
numbness, itching, pain, discoloration or structural changes in
the skin. These effects can be worsened by low ambient
temperatures and/or an excessive grip on the handles. At the
onset of symptoms, limit the time you use the machine and
seek medical advice.
7.1HOW TO USE THE MACHINE
The battery has a protection device that prevents its total
discharge.
The machine switches off automatically if the rechargeable
battery is flat. In this case, it must be promptly recharged.
7.2 WORKING TECHNIQUES
Over exposure to vibrations can result in blood-
vessel or nerve injury to persons suffering with blood
circulation problems. Seek medical attention if you
experience physical symptoms such numbness, lack
of feeling, reduction in normal strength, changes
in the colour of the skin. These symptoms normally
appear in the fingers, hands or wrists.
• Check the conditions of the blower before using it,
particularly the air intake.
• Under dusty conditions, slightly spray the work area with a
hose or use a mister attachment when water is available.
• Watch out for children, pets, open windows or cars, and
blow debris safely away.
• After using the blower, clean up and dispose of debris in
trash receptacles.
WARNING! - When working with the blower, wear the
required protecting equipment:
1. Eye protection.
2. Face mask in dusty environments.
WARNIG - When working inside corners, blow from
the corner and inward toward the centre of the work
area.
20
7.3 COMPLETION OF WORK
Once work is done, stop the motor as previously indicated.
WARNING! Let the motor cool down before storing the
machine in any environment.
To reduce the risk of fire, remove any branch residue or
leaves from the machine; do not leave containers with
waste material inside a room.
After each work session, it is a good idea to disassemble the
blower hose, then clean the debris and dirt from the blower
hose and the safety guard slots.

8. ROUTINE MAINTENANCE

MAINTENANCE PROGRAM
WARNING: always remove the battery before any
maintenance work on the machine. Allow your Authorized
Service Center to repair any damage to your product.
The following is a list of the maintenance operations that must
be carried out on the machine. Most of the chapters are
described in the Maintenance section. The user must perform
only the maintenance and servicing described in this
Operator's Manual. More extensive work should be carried out
by the Authorized Service Center workshop.
Maintenance
Clean the outside of the machine with
a clean, dry cloth. Never use water.
Keep the handles dry, clean, and free
from oil and grease.
Make sure the switch lever works
correctly and is not damaged.
Check that there are no broken or
damaged parts on the outer parts of
the machine.
Check that nuts and screws are
tightened.
Check that the battery is intact.
Check the battery charge status.
Check that the battery charger is intact
and operational.
Check the connections between the
battery and the machine, and check
the connection between the battery
and battery charger as well.
WARNING! For your safety and the safety of others:
-
After each use, remove the battery from its housing and
check for any damage.
-
Proper maintenance is essential to maintain the original
good working order and safety of the machine over
time.
-
Keep nuts and screws tightened, to make sure the
machine is always in safe working conditions.
Never use the machine with worn or damaged parts.
-
Damaged parts must always be replaced and never
Daily
Monthly
maintenance
maintenance
X
X
X
X
X
X
X
X
X

Publicité

Table des Matières
loading

Table des Matières