Precautions To Reduce Vibration Risk; Maintenance Precautions - Efco SA 3000 Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Precautions to Reduce Vibration Risk

• The blower is provided with anti-vibration (AV) system; never alter or modify it.
• Wear gloves and keep your hands warm.
• Maintain a firm grip at all times, but do not squeeze the handles with constant, excessive pressures,
take frequent breaks. All the above mentioned precautions do not guarantee that you will not sustain
whitefinger disease or carpal tunnel syndrome. Therefore, continual and regular users should monitor
closely the condition of their hands and fingers. If any of the above symptoms appear, seek medical
advice immediately.
Maintenance Precaution
WARNING: Never operate a blower that is damaged, improperly adjusted, or is not
completely and securely assembled.
WARNING: All blower service, other than items in the Operator's Manual maintenance
instructions, have to be performed by competent blower service personnel. (If improper
tools are used to remove the flywheel or clutch, or if an improper tool is used to hold the
flywheel in order to remove the clutch, structural damage to the flywheel could occur which
could subsequently cause the flywheel to burst and serious injury could result.)
WARNING:
Never modify your blower in any way.
Keep the handles dry, clean, and free of oil or fuel mixture.
WARNING: Use only accessories and replacement parts recommended.
• Never attempt to service the blower while the engine is running.
• Never use fuel for cleaning operations.
• Keep the blower in a dry place, off the ground and the tanks empty.
• If your blower is no longer usable, dispose of it properly without damaging the environment by
handing it in to your local Dealer who will arrange for its correct disposal.
• Replace immediately any safety device when damaged or broken.
WARNING: The muffler and other parts of the engine (e.g. fins of the cylinder, spark
plug) become hot during operation and remain hot for a while after stopping the engine.
To reduce risk of burns do not touch the muffler and other parts while they are hot.
SAFETY RULES
en
9

Publicité

Table des Matières
loading

Table des Matières