Repairs · Calibration Service - BRAND Transferpette S 8 Mode D'emploi

If a problem cannot be fixed by following the troubleshooting guide, or by
replacing spare parts, then the instrument must be sent in for repair.
For safety reasons, instruments returned for checks and repairs
must be clean and decontaminated!
Return for repair
a) Clean and decontaminate the instrument carefully.
b) Complete the "Declaration on Absence of Health Hazards" (ask
your supplier or manufacturer for forms. A sample form is available
at www.brand.de for download).
c) Send the completed form along with the instrument to the manu-
facturer or to the dealer with an exact description of the type of
malfunction and the pipetted media.
The return transport of the instrument is at risk and cost of the sender.
Calibration Service
ISO 9001 and GLP-guidelines require regular examinations of your
volumetric instruments. We recommend checking the volume every 3-12
months. The interval depends on the specific requirements on the instru-
ment. For instruments frequently used or in use with aggressive media,
the interval should be shorter. The detailed testing instruction can be
downloaded on www.brand.de.
BRAND also offers you the possibility to have your instruments calibrated
by the BRAND Calibration Service or the BRAND-owned DKD Calibration
Service.
Just send in the instruments to be calibrated, accompanied by an
indication of which kind of calibration you wish. Your instruments will be
returned within a few days together with a test report (BRAND Calibration
Service) or with a DKD Calibration Certificate. For further information,
please contact your dealer or BRAND.
Repairs · Calibration Service
45