Servicing And Cleaning - BRAND Transferpette S 8 Mode D'emploi

The three main components of the manifold can be easily separated and
disassembled for servicing, cleaning or replacing parts. The procedures
are illustrated on the following pages.
The changing of the V-rings/O-rings on the individual nose
Note:
cones is described in detail in the instructions enclosed with
the spare part.
The main components of the manifold
A
Piston unit with piston support bar
[ I ] and pistons inserted in this unit,
which can be unscrewed individually
for cleaning or replacement.
B
Nose cone assembly with nose
cone support bar [ II ] and central
guide rod (Z), which is attached to
this, and the nose cones and seals,
which can be screwed out individually
for cleaning or replacement.
C
Manifold housing, which is con-
nected to the manifold housing cover
[ III ] of the piston unit with two turn-
lock fasteners.
Continued on page 36

Servicing and Cleaning

A
B
C
III
I
z
II
35