Amplicord D1 Mode D'emploi page 10

Thank you for choosing the Amplicord D1 digital
EN
electrolarynx, a mix of innovation and design to best
serve your communication needs.
Contents of the Box [A]
Amplicord D1
Power charger
9V rechargeable battery
Security Strap
Product Description [B]
Device Head
LED
Joystick
Power switch
Getting Started with your Device [C]
1. Slide the battery cover to remove it, by applying a light pressure
on the three notches.
2. Insert the battery, matching it to the + and - symbols on the
bottom of the battery compartment.
3. Attach the strap.
4. Close the battery compartment, making sure it is properly shut.
Recharging the Battery [D]
1. Make sure that the device is switched off, by checking that the
power switch is in the top position.
2. Connect one end of the charger to a wall plug, and the other end
to the power charger port at the bottom of your device.
3. The LED will turn red: the battery is now charging.
4. It should take 8/10 hours to fully charge the battery.
Slip Case
User's Guide
Power charger port
Strap hook
Battery Compartment Cover
Strap hook