Kenwood TTM310 Série Mode D'emploi page 4

CAUTION: Avoid touching the
metal parts with the tongs.
to toast food items
using the sandwich
cage
●
Thoroughly cook or re-heat
ingredients such as meat or
fish prior to adding them to
the food item and ensure all
ingredients are piping hot
throughout before serving.
Do not re-heat ingredients
more than once.
●
Do not leave hot ingredients
to cool before toasting the
food item.
●
Ensure all ingredients
particularly meat or fish are
fresh and used within use-by
dates.
●
Use other vegetable ingredients
at room temperature to avoid
them chilling the hot cooked
ingredients.
●
When cutting your paninis or
ciabattas etc do not cut all the way
through, instead leave the bottom
side uncut so that it prevents melted
cheese from dripping into the toaster.
●
Cut ingredients thinly - do not use
large chunks.
●
Take care when using ingredients
that could melt and run out of the
food item. We do not recommend
the use of high fat or similar fillings
that may drip into the toaster as this
will be difficult to clean.
●
Lightly butter the outside surface of
sandwiches and place the filling in
between the unbuttered sides. This
helps prevent the outside from
burning. Do not use low fat spreads,
which are not suitable for toasting.
●
Ensure the food item is evenly filled.
●
Always use food items that are a
suitable size for the sandwich cage.
Do not force food items into the
toaster.
1 Plug the toaster into the power
supply, an audible beep will be heard.
2 Place the food item in the sandwich
cage and close.
3 Adjust the slot width to suit the
sandwich cage
Take care not to touch the
fascia panel, it may be hot.
4 Lower the carriage lever
place the sandwich cage into the
slot with the handle pointing to
the opposite end to the controls.
5 Move the browning control to the
desired setting.
6 Select the desired button (i.e. low
power). The selected button and
cancel button lights will illuminate, an
audible beep will be heard and
toasting will begin.
●
In order to monitor the progress of
the toasting, the sandwich cage can
be lifted up without cancelling.
7 To stop toasting at any stage, press
the cancel button. The toaster will
emit an audible beep to indicate
toasting is cancelled and the button
lights will go out.
8 When toasting is nearly finished the
toaster will emit an audible beep and
after a slight delay the button lights
will go out and the toasting will stop.
The food item will NOT pop up.
9 Leave the toasted food item to stand
for 1 minute inside the toaster before
serving.
10 Remove the sandwich cage then
open it up and tip the food item onto
a plate.
11 After using, unplug the toaster.
CAUTION:
●
The sandwich cage will be
very hot, ensure it is placed
on a heat resistant surface
and take care when handling.
●
Ensure ingredients are piping
hot throughout before serving.
●
Take care when biting into the
food items as the fillings can
be very hot.
4
. CAUTION:
and