Operating Instructions / English; Use And Function; Remote Control; Pairing Mode - Lenz rcB 1200 Mode D'emploi

OPERATING INSTRUCTIONS / ENGLISH

Note:
The lithium packs cannot be switched to the POWER OFF mode manually!
If there is no heatable textile or charger connected to the lithium packs, the lithium
packs automatically switch to the POWER OFF mode after 12 hours!
(If you are using the Lenz heat app* to control your lithium packs remotely, the app must
also be closed on your smartphone in order for the lithium packs to be able to successfully
switch to the POWER OFF mode.)
IN USE:
The lithium packs supply the connected heatable textile with power.
￭
STANDBY:
The heat setting display (Fig. 1.2) flashes briefly at an interval of 2.5 seconds.
￭
The lithium packs are in stand-by and can be activated with the control button of the lithium
￭
packs (Fig. 1.3), or via the Lenz heat app* (Smartphone).

USE AND FUNCTION

Turn on the product to the lowest heat setting by briefly pushing the control button
(approximately 0.5 seconds) on the lithium pack (Fig. 1.3).
Push the control key repeatedly to switch to the next higher setting and back to standby mode
after level 3.
The respective heat setting is indicated by the illumination of the heat setting display (Fig. 1.2)
on the lithium pack.
LED, flashing – standby (no heating power)
LED, steady on – low heating power
LEDs, steady on – meduim heating power
LEDs, steady on – high heating power
– 26 –

REMOTE CONTROL

The lithium packs rcB 1200 / lithium packs rcB 1800 can be controlled via the Lenz heat app*
for smartphones. The lithium packs must be in "Pairing Mode" to be able to couple them properly
with the smartphone.

Pairing Mode

Please switch the desired lithium packs to "Pairing Mode". For this purpose, push the control
button (Fig. 1.3.) for approx. 10 seconds until the heat setting displays (Fig. 1.2.) are blinking
and then immediately release the control button. The heat setting display in the middle is
flashing constantly.
LED, steady on – Pairing Mode
Note: The Pairing Mode remains active for 2 minutes! If no pairing takes place during this
time, this mode will end automatically!
*The optional Lenz heat app* for convenient control is available for download via the
Android Play Store and the Apple Store.

HEATING POWER - HEATING PERIOD

The heating times for the heat settings are outlined in the following table for your information.
Heat Heating period, Heating period,
setting lithium pack lithium pack
rcB 1200 rcB 1200
(Use with (Use with
heat socks) heat vest)
1 10,0 – 14,0 h 5,5 – 7,5 h
2 5,5 – 7,5 h 3,0 – 4,0 h
3 3,5 – 4,5 h 2,0 – 2,5 h
Heating period, Heating period,
lithium pack lithium pack
rcB 1200 rcB 1200
(Use with (Use with
heat bandage) heat gloves)
5,5 – 7,5 h 6,0 – 7,5 h
3,0 – 4,0 h 3,0 – 4,0 h
2,0 – 2,5 h 2,0 – 2,5 h
– 27 –