Télécharger Imprimer la page

Elba E 230-050 X Mode D'emploi page 18

Publicité

Les langues disponibles

Les langues disponibles

CLEANING ELECTRIC
HOTPLATES
Always clean when the hotplate is
tepid.
Use a soft cloth, dampened with
water, and a little salt. To finish off,
use a soft cloth with a little oil.
Do not use water, to avoid the
formation of rust.
VITROCERAMIC HOB
Before cleaning the top, make
sure that it is switched off.
Remove any encrustation using a
special scraper which can be bought
(fig. 5.6).
Remove dust using a damp cloth.
Detergents can be used as long as they
are not abrasive or corrosive.
All residues of detergent must be
eliminated with a damp cloth.
Keep all objects that could be melted by
the heat away from the top: plastic
objects, aluminium foil, sugar or sugary
products.
If an object melts on the top, remove
immediately (while the top is still hot)
using the special scraper to avoid
permanent damage to the pyroceram
surface.
Avoid using knives and pointed objects
as they could damage the surface of the
top.
Also avoid using abrasive sponges or
wire wool which can permanently
scratch the pyroceram surface.
18
Fig. 5.6
Do not scratch the cooktop with
cutting or sharp objects.
Do not use the cooktop as a
work surface.
Do not use steam jet cleaners
because the humidity could
infiltrate into the appliance making
it dangerous.

Publicité

loading