Publicité
Les langues disponibles
Les langues disponibles
• do not leave the tool running.
• Be Aware that this tool is always in an operating condition,
does not have to be plugged into an electric outlet.
• When operating the tool from an elevated position
things beneath you.
• Always hold the tool firmly in your hands before switching the tool
"on".
The reaction to the torque of the motor as it accelerates to full speed may cause the
tool to twist.
• Wear eye and hearing protection.
unless otherwise specified, everyday glasses provide only limited impact resistance, they are
not safety glasses. use only certified safety equipment; eye protection equipment should comply
with ANSI z87.1 standards. Protective hearing equipment should comply with ANSI s3.19
standards.
• Protect your lungs.
rule will reduce the risk of personal injury.
• Always
place the switch in the locked or off position before any assembly, adjustments or
changing of accessories. following this instruction will reduce the risk of serious personal injury.
• do not place battery tools near fire or heat.
and possibly personal injury.
imPoRtAnt SAFEtY inStRuCtionS FoR ChARgER &
BAttERY
• Save These Instructions.
instructions for your battery charger.
• Before Using the battery Charger,
on (1) Battery Charger, (2) Battery , and (3) Product using battery.
• Use only the charger
in this manual. Do not substitute any other charger.
• Do not recharge battery in damp or wet environments.
battery pack to water or rain.
• Do not operate charger with damaged cord or plug.
• Do not operate charger if it has received a sharp blow,
otherwise damaged in any way. Take it to a qualified serviceman.
• Do not disassemble charger or battery pack.
serviceman when service or repair is required. Incorrect reassembly may result in a risk of
electric shock or fire
• Do not charge battery pack
C) or above 104 degrees f (40 degrees C). Store tool and battery pack in a location where
temperature will not exceed 122 degrees f (50 degree C). This is important to prevent serious
damage to the battery cells.
Operate the tool only when hand-held.
Wear a face or dust mask if the operation is dusty. following this
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating
which accompanied your product or direct replacements as listed
.
when temperature is below 50 degrees f (10 degrees
Always use safety glasses with side shields.
This will reduce the risk of explosion
read all instructions and cautionary markings
Take it to a qualified
because it
, be aware of people or
Do not expose
Replace immediately.
been dropped or
7
Publicité
