DeWalt DW898 Guide D'utilisation page 2

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY D WALT TOOL, CALL US TOLL FREE AT:
E
1-800-4-D WALT (1-800-433-9258)
E
HEAD
SET SCREW
HOUSING
PUNCH
DIE
DW898/DW898-220 Volt
COVER
RING 14-Gauge Nibbler
SWITCH
LOCK
PADDLE SWITCH BUTTON
IMPORTANT SAFETY
INSTRUCTIONS (FOR ALL TOOLS)
WARNING: When using electric tools, basic safety precautions
should always be followed to reduce risk of fire, electric shock, and
personal injury, including the following:
READ ALL INSTRUCTIONS
Double Insulation
Double insulated tools are constructed throughout with two separate
layers of electrical insulation or one double thickness of insulation
between you and the tool's electrical system.
Tools built with this insulation system are not intended to be
grounded. As a result, your tool is equipped with a two prong plug
which permits you to use extension cords without concern for
maintaining a ground connection.
NOTE: Double insulation does not take the place of normal safety
precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical
insulation failure within the tool.
CAUTION: When servicing all tools, USE IDENTICAL REPLACE-
MENT PARTS. Repair or replace damaged cords.
Polarized Plug
Polarized plugs (one blade is wider than the other) are used on
equipment to reduce the risk of electric shock. When provided, this
plug will fit into a polarized outlet only one way. If the plug does not
fit fully into your outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install a proper polarized outlet. Do not
modify or change this plug in any way.
For All Tools:
• KEEP WORK AREA CLEAN. Cluttered areas and benches invite