Front Brake Fluid Level Control - Askoll eSpro 45 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ADJUSTMENTS AND PERIODIC MAINTENANCE

FRONT BRAKE FLUID LEVEL CONTROL

The front brake fluid reservoir is equipped with an
inspection window to control the level in the tank.
If the brake fluid level is low or insufficient, DO NOT fill
the tank but check the wear of pads and disc as well
as for leaks in the braking circuit.
Brake fluid is hygroscopic, i.e. it absorbs moisture from the surrounding air. If
WARNING
humidity in the fluid exceeds a certain value, braking will be inefficient.
It is advisable to change the fluid every 2 years, never use brake fluid from partially
WARNING
used or open containers.
WARNING
Use only DOT4 brake fluid
Brake fluid is highly corrosive. Prevent it from being in contact with skin or with
WARNING
painted parts. In case of contact with skin, wash thoroughly with water.
48
eSpro45_eSpro70_Rev_2_EN.indb 48
eSpro45_eSpro70_Rev_2_EN.indb 48
14/07/2020 14:41:52
14/07/2020 14:41:52

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Espro 25Espro 70

Table des Matières