Setting The Clock - Askoll eSpro 45 Mode D'emploi

Setting the clock

• Press and hold SELECT button for 2 seconds: two
hour digits will start blinking.
• Press SELECT as necessary to set the right hour.
• Press SET: minutes digits will start blinking while
hour digits will not blink any more.
• Press SELECT as necessary to set the right
minutes.
• Press SET button to exit.
Since time is stored in the vehicle battery, in case of
two batteries, it is convenient to set the clock with both
batteries installed to synchronize time. In the presence
of two batteries, time displayed is the one stored in
compartment A.
For battery description and placement in compartments
A and B refer to the chapter "BATTERY AND
CHARGE".
eSpro45_eSpro70_Rev_2_EN.indb 27 eSpro45_eSpro70_Rev_2_EN.indb 27
A Km/trip
PWR
%
SELECT
USE
EN
EN
EN
EN
SET
EN
27
14/07/2020 14:41:25 14/07/2020 14:41:25