Engine Enabling - Askoll eSpro 45 Mode D'emploi

USE

Engine enabling

The engine must be enabled to start.
To enable the engine, insert the key into the switch
and turn it to , then press for 3 seconds to enable
the engine, motion warning light will turn on.
To disable the engine, press the engine enabling
button again for 3 seconds and turn the key in the
ignition switch to the left on
The engine will be disabled also by rotating the key
to .
22
eSpro45_eSpro70_Rev_2_EN.indb 22 eSpro45_eSpro70_Rev_2_EN.indb 22
eS 45
pro
.
eS 70 eS 25Km/h
pro pro
14/07/2020 14:41:13 14/07/2020 14:41:13