Publicité
Les langues disponibles
Les langues disponibles
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
OPTIONAL ACCESSORIES
CAUTION:
•
These accessories or attachments are recommended for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might present a risk of injury to persons. Only use acces-
sory or attachment for its stated purpose.
•
If you decide to use your Makita sander with approved accessories which you purchase from your Makita
distributor or factory service center, be sure to obtain and use all necessary fasteners and guards as recom-
mended in this manual. Your failure to do so could result in personal injury to you and others.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
1
2
3
4
-
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
► 1. Brush holder cap 2. Screwdriver
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
1
2
3
4
GA7911
Grip 36
Rubber pad 170
Abrasive disc
Sanding lock nut 5/8-48
Lock nut wrench 28
7 ENGLISH
1
2
Publicité
