Audiovox VME 9725 NAV Mode D'emploi page 91

External Devices
External peripheral devices, including a game console, camcorder, navigation unit,
iPod, Zune, etc. can be connected to this unit via RCA output using an A/V Media
Adapter Cable (not included).
Right Audio
1
Left Audio
2
Ground
3
V ideo
4
3.5mm A/V Cable (not included)
Connect the external device to the A/V Media Adapter Cable and then plug the cable
into the A/V INPUT connector on the front of the radio. Select "AUX IN" mode to
access auxiliary devices. You cannot directly control external devices connected to
the A/V INPUT. For information regarding the use of USB devices, see "Inserting a
USB Device or SD Card".
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder on the front panel.
When the volume level reaches "0" or "50", a beep sounds, indicating that the
adjustment limit has been reached. The TFT screen displays the volume level for 3
seconds.
Programmable Turn-On Volume
This feature allows the user to select a turn-on volume setting regardless of the
volume setting prior to turning the unit off. To program a specific turn-on volume level,
turn the rotary encoder to adjust the volume to the desired turn-on volume. Push and
hold the rotary encoder while the speaker icon and level indication is displayed on the
screen. The unit will beep to confirm your turn-on volume setting.
Cover Not Shown
91