Answering An Incoming Call; Rejecting An Incoming Call; Volume Control; Audio Mute - Audiovox VME 9725 NAV Mode D'emploi

Answering an Incoming Call

To answer an incoming call touch the
clearly into the microphone. To end the conversation, touch the

Rejecting an Incoming Call

Press the Transfer to Phone icon to reject an incoming call. The call will revert to
your mobile phone and be left for voice mail.

Volume Control

To increase or decrease the volume level of an incoming call, turn the rotary knob on
the front panel or press the VOL +/ - buttons on the remote control.

Audio Mute

To mute the phone call audio from the unit when a call is received, press the
front panel rotary knob. Press the front panel rotary knob again and phone
call audio will be restored to the unit.
Making an Outgoing Call
Outgoing calls can be performed by direct dialing using the unit's touch screen
keypad. The keypad screen is accessed by touching the Direct Entry icon .
Direct Dialing
1. Touch the Direct Entry icon and the following screen will appear:
2. Using the keypad, touch 0-9,*, # to enter the phone number you wish to dial. If
you enter an incorrect number touch the red X icon on the keypad to delete the
incorrect number.
3. Once the correct number appears on the screen touch the
direct entry screen touch the X icon in the upper right corner of the screen.
4. To end the call touch the
icon. For best reception, speak loudly and
icon on the previous screen.
134
icon.
31
icon. To exit the