Publicité
Les langues disponibles
Les langues disponibles
PORT TESTING
• Connect the CableMaster 800/850 to a switch or active network jack.
• From the Network/PoE screen, press the Port test soft key
• The CableMaster 800/850 will automatically perform a port test upon entering the Port Test screen.
• Select one of the following Port Test soft keys to perform a specific test:
- DHCP – Obtain Network IP address and DHCP information
- LLDP – View Link Layer Discovery Protocol supported switch information
- CDP – View advertised Cisco protocol information
- Link Light –
connected to
HOW TO PERFORM A DEVICE DISCOVERY TEST
PING IPV4/IPV6
• Connect the CableMaster 800/850 to a switch, router, or active network jack.
• From the home screen, use the right arrow button to select the Network Discovery icon and
press the enter button
• The CableMaster 800/850 will perform a DHCP test and obtain an IP address (to ping IPV6,
press the IPV6 soft key).
• Press the ping soft key
• Use the left and right arrows to highlight a digit. To change a digit, use the up and down arrows
or press the keypad soft key
press the keypad soft key again.
• Press the test button to ping the IP address.
LIST
• Press the list soft key
• To ping an IP address in the list, use the up and down buttons to navigate to the desired IP
address and press the test button.
FAVORITES
• From the List screen, press the Favorites soft key
• Use the up and down arrow buttons to scroll through the list.
• Press the test button
800/850 will show the URL IP address obtained by the DNS server.
• Press the test button
IP DISCOVERY
• From the Network Discovery screen, press the IP discovery soft key.
• The CableMaster 800/850 will scan the network and display IP addresses within a Network. The
list will include device labels to the left of the IP addresses.
• Use the up and down arrow buttons to scroll through the IP list. Press the enter
view the MAC address associated with the selected IP address.
TCP/UDP THROUGHPUT TESTING
4
• Please refer to the CableMaster 800/850 instruction manual for TCP/UDP throughput
T3 Innovation
4
instructions.
T3 Innovation
T3 Innovation
4
4
4
T3 Innovation
4
T3 Innovation
4
4
4
T3 Innovation
4
Flash the port LED on a hub, switch, or router to identify the port you are
or press the Network Discovery soft key
.
to view discovered IP addresses and manually pinged IP addresses
to select an IP or URL address. The CableMaster
again to ping the IP address.
T3 Innovation
T3 Innovation
T3 Innovation
T3 Innovation
4
to use an alphanumeric keypad. To unselect the keypad,
to ping from the favorites list.
soft key.
soft key.
soft key.
soft key.
soft key.
soft key.
.
T3 Innovation
4
4
.
soft key.
soft key.
soft key.
soft key.
button to
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
T3 Innovation
5
5
Publicité
