Arcora ANIKO 25 Manuel D'utilisation Et De Maintenance page 12

In this modality the machine washes and dries with the spray nozzle and the vacuum head which are
situated below the body of the machine.
To switch on the machine you must act on the switches on the control panel:
1. Set to position "I" the switch of the vacuum motor.
2. Set to position "I" the pump switch. In this way the solution pump works only while you rotate
the hand grip of the machine.
3. To clean carpets, rotate the lever on the vacuum head towards the right side. To clean hard
floors, rotate it towards the left side.
4. To activate the rotating brush switch on the power brush motor, act on the correspondent
luminous switch, located in the nearby of the vacuum head.
Attention: Do not use the machine as a vacuum cleaner!
Do not let the pump function without water! Check periodically the level of water in the lower tank,
while using the machine. As soon as it becomes empty you must switch off the machine, empty the
upper tank (which then will be full) and fill again the lower tank before activating the pump.
Attention: Keep an adequate distance from other people. Pay attention to any object that could hit by
the machine. Never leave the machine unguarded.
Use as a Self-contained Machine
12