Tabuchi Electric EHW-S55P3B-PNUS Manuel D'installation page 16

1
Attach the crimp terminal and insulating tube to the wire.
Insulating Tube
2
Connect the grounding line.
The inverter has a grounding terminal so as to securely ground
the equipment.
In order to prevent electric shock, be sure to connect the
ground securely.
Ground the breaker box through the inverter.
Grounding installation should be performed by a licensed
electrician in accordance with technical standards for electrical
equipment and internal wiring codes.
3
Connect the wires to the inverter terminal block and connectors.
Tightening torque: M5 screw ... 2.0 to 2.4 Nm (1.5 to 1.8 ft·lb)
16
Crimp Terminal
Use the proper crimping tool for the screw size and
electric wire diameter of the terminal block.
Tightening torque: 2.0 to 2.4 Nm
(1.5 to 1.8 ft·lb)
③ ②
①