Sony CSS-SA Mode D'emploi page 14

Symptom
Your computer does not recognize your
camera
Buttons on the Cyber-shot Station does
not work, and no operations can be
performed
The connection between the printer
and the Cyber-shot Station cannot be
established
Unable to print still images
Printing is canceled
14-GB
Cause/Solution
• The camera is turned off.
t Turn on the camera.
• You are not using the supplied USB cable.
t Use the supplied USB cable.
• The USB cable is not connected firmly.
t Disconnect the USB cable from both the
computer and the Cyber-shot Station, and
connect it again firmly. Make sure that "USB
Mode" is displayed on the screen.
• The camera is not placed on the Cyber-shot Station
correctly.
t Place the camera correctly.
• The USB jacks on your computer are connected to
other equipment besides the keyboard, the mouse,
and the Cyber-shot Station.
t Disconnect all equipment other than the
keyboard, the mouse, and the Cyber-shot
Station from the USB jacks.
• The camera is not placed on the Cyber-shot Station
correctly.
t Place the camera correctly.
• The AC Adaptor is disconnected.
t Connect the AC Adaptor properly.
• The printer may not be PictBridge-compliant.
t Ask the printer manufacturer whether your
printer is PictBridge-compliant.
• The printer is not set for the connection with the
camera.
t Be sure that the printer is on to connect with
the camera.
• The Cyber-shot Station is not connected to the
printer properly.
t Check that the Cyber-shot Station and the
printer are properly connected using the USB
cable.
• The printer is not turned on.
t Turn on the printer.
For further infomation, refer to the operating
instructions supplied with the printer.
• Movies cannot be printed.
• Still images modified with a computer or still
images taken using other than the camera
compatible with this Cyber-shot Station may not
be able to be printed.
• You disconnected the USB cable before the
mark disappeared.
• You removed the camera from the Cyber-shot
Station before the mark disappeared.