Télécharger Imprimer la page

SPIKES-SPIDER ALPINE Instructions De Service page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Please refer to the table in the annex for determination of the recommended pre-
adjustment A (large tire size), B (medium tire size) or C (small tire size).
The chain is already pre-adjusted to fit the most com-
mon tire sizes. All adjustment joints connected to the
synthetic bows of the chain are in position "long" and all
adjustment joints in-between the synthetic bows are in
position "short".
Adjustment "A" (large tire size)
It may be necessary to change the adjustment at the
adjustment joints in-between the synthetic bows of the
chain (not at the adjustment joints connected to the syn-
thetic bows) depending on the tire dimension. Proceed
with fine adjustment and make sure that a flat hand fits
between tire and chain (ref. to Mounting - Step 5).
Adjustment "B" (medium tire size)
For adjustment "B" you must shorten first the chain by
changing the position of two adjustment joints which
are facing each other and are connected to the synthe-
tic bows to adjustment "short". For fine adjustment you
must only change the position of the adjustment joints
in-between the synthetic bows. Proceed with fine
adjustment and make sure that a flat hand fits between
tire and chain (ref. to Mounting - Step 5).
Adjustment "C" (small tire size)
For adjustment "C" you must shorten first the chain by
changing the position of all four adjustment joints
which are connected to the synthetic bows to adjust-
ment "short". For fine adjustment of the chain you must
only change the position of the adjustment joints in-bet-
ween the synthetic bows. Proceed with fine adjustment
and make sure that a flat hand fits between tire and
chain (ref. to Mounting - Step 5)..
Recommended adjustments for SPIKES-SPIDER Alpine and Alpine Pro
Adjustment joint in position "long"
(in direction of driving)
Adjustment joint in position "short"
(across to direction of driving)
Adjustment joint in position "long"
(in direction of driving)
Adjustment joint in position "short"
(across to direction of driving)
english

Publicité

loading

Produits Connexes pour SPIKES-SPIDER ALPINE

Ce manuel est également adapté pour:

Alpine pro