Your Cooker Hood; Introduction; Exhaust Systems - Atag WV6311LM Notice D'utilisation

YOUR COOKER HOOD

Introduction

Exhaust systems

EN 4
These operating instructions offer you a clear overview of all the
possibilities that the appliance offers. You will find here information
about the safety and servicing of the appliance.
Read this user manual thoroughly before you first use the
appliance, and store the manual safely for future use.
Declaration of conformity
We declare that our products comply with the applicable European
directives, standards and rules, as well as all requirements in the
standards to which reference is made.
First read the separate safety instruction before
you are going to use the appliance!
Depending on the model, the cooker hood can be fitted in two ways:
1. As a cooker hood connected to an exhaust duct.
The extracted and filtered cooking vapours are removed to the
outdoors. This is the best way!
2. As a recirculation cooker hood.
The grease particles and the odour from the extracted cooking
vapours are filtered. The extracted air is not removed but is returned
to the kitchen. Therefore, you must fit a carbon filter.
Note!
The carbon filter must be ordered separately.