Velleman MON9TA2 Mode D'emploi page 5

Menu
Color
Function
OSD (on screen display)
Sound
8. Replacing the batteries of the remote control
1. Slide the battery slot open.
2. Remove the battery.
3. Insert a new battery (always use the correct battery type: see Technical specifications). Make sure
the polarity is correct.
4. Close the battery slot.
WARNING

Do not puncture or throw batteries in fire as they might explode.

Dispose of batteries in accordance with local regulations.

Keep batteries away from children.
9. Cleaning and maintenance

Make sure the monitor is off before performing any maintenance activities.

Use a soft damp cloth to clean the monitor.

Do not apply excessive pressure on the display.

Do not use abrasive solutions or solvents.
10. Technical Specifications
display mode
screen size
resolution
number of pixels
video input signal
OSD function
input resolution
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
V. 01 – 06/06/2013
MON9TA2
Options

brightness

contrast

saturation

reset

display ratio

ir on/off

horizontal position

vertical position

timeout

transparency

volume setting
TFT Active Matrix (16:9/4:3)
9"
800 (H) x 480 (V)
384 000
1.0 Vpp / 75 Ω (composite video signal)
horizontal/vertical image reversing, setting adjustment and volume
HDMI: under 1080P
VGA: 800 x 600 pixels or 1024 x 768 pixels
monitor: max. 12 VDC ± 10%
power consumption: max. 5 W
remote control: 1 x 1.5 V CR2025 battery (incl.)
optional power supply: PSSMV18 (plug 4 x Ø 1.7 mm)
219 x 142 x 28 mm
450 g
5 ©Velleman nv