Publicité
Les langues disponibles
Les langues disponibles
User manual
1.3 Product labelling
The product CE label is present on the back side of the product as indicated in the illustration below.
Another registration label is not directly visible, but is located inside the product, behind the battery
cover. All labels are attached by the manufacturer and should not be removed.
Battery 9V
Battery-cover
For traceability and warranty administration the registration number label is placed inside the product,
to be sure it remains undamaged. This official registration number is directly related to the device. E&P
Hydraulics or the dealer may ask for this number (e.g. when the product needs to be serviced), so
please familiarise yourself with it.
Changing battery
Remove the battery cover by firmly pressing, then sliding out and lifting the cover from the casing.
Insert the battery and carefully mount the battery cover.
E&P HYDRAULICS
Remote control
Product CE label
Registraton label
7
Publicité
