Télécharger Imprimer la page

NASA WSP1300 Manuel D'utilisation page 14

Publicité

Les langues disponibles

Les langues disponibles

4 - RADIO MODE
STATIONS SELECTION
- Extend the antenna wire (25) for better reception of FM stations.
- Press button (16) until the radio frequency is displayed on the LCD screen (7).
- To manually select a radio station, press button (21) or (22) until the station's frequency is displayed.
- To initiate an automatic station search, press and hold button (21) or (22) until the frequency starts to
scroll. The search stops when a radio station is found.
- The automatic search can be interrupted by pressing button (21) or (22).
STATION SAVING
- To select a radio station, press button (21) or (22) until the station frequency is displayed.
- Press button (19). P01 will be displayed.
- To select a saved station, press button (21) or (22).
- Press button (19) again to confirm the setting, the saving number stops flashing.
- Proceed as above to save other radio stations. You can set up to 10 radio stations.
LISTENING TO A SAVED STATION
- Press button (13), the last radio frequency appears.
- Press button (6) and then button (9) or (10) to select a saving (P01 to P10)
5 - BLUETOOTH MODE
INFORMATIONS
- The operational range between this device and a Bluetooth device is approximately 10 metres.
- Before connecting a Bluetooth device to this unit, familiarise yourself with the Bluetooth features of
that device.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstruction between this device and a Bluetooth device may reduce the operational range.
- Keep this device away from other electronic devices to avoid interference.
BLUETOOTH ACTIVATION
- Press button (16) successively to switch on the device and (17) select the Bluetooth function, the (bt)
symbol will flash (10).
- Start the Bluetooth profile search from the source audio device.
- Select the SWB254 profile to synchronise the two devices (the Bluetooth symbol (10) no longer flashes).
- Playback music from the source audio device.
- Press button (20) to pause. Press again to resume playback.
- Press button (21) to move to the next track.
- Press button (22) once to return to the beginning of the current track, twice to return to the previous
track.
ADJUST THE VOLUME TO THE CORRECT LISTENING LEVEL
Then adjust the volume with the + / - buttons (23 and 24).
DISCONNECTING THE BLUETOOTH
Press button (16) to turn off the unit and disconnect the Bluetooth device.
NOTE: The device cannot receive music from two Bluetooth audio devices simultaneously. You must
first disconnect the Bluetooth function from the associated device and then search again for the Bluetooth
device to be synchronised.

Publicité

loading

Produits Connexes pour NASA WSP1300