Exchanging Samples Between Two Pads; Copying A Sample To Another Pad - Roland SP-404SX Mode D'emploi

Exchanging Samples between
Two Pads
You can exchange samples between two pads. This lets
you bring together the desired samples into a single bank.
MEMO
If you decide to cancel this operation during the
procedure, press the [CANCEL] button.
1. Hold down the [FUNC] button and press the pad
[2] (EXCHANGE) .
The display will indicate "
the [REC] button will light.
2. Press the pad for one of the samples you want to
exchange .
3. Press the other pad .
MEMO
You can also select to a different bank.
When the two pads have been pressed, the [REC] button
will blink.
4. When you press the [REC] button, the exchange
will begin .
CHG
When the " " indication in the display has disappeared,
the exchange is complete.
NOTE
• If there is not enough free memory to perform the
exchange, the display will indicate "
exchange cannot be performed.
• Never turn off the power before the exchange has been
completed. Doing so will destroy the SD card.
C HG
, " and the [DEL] button and
FUL
" and the
Copying a Sample to Another
Pad
You can copy a sample from one pad to another pad.
This lets you create another sample based on an existing
sample.
MEMO
If you decide to cancel this operation during the
procedure, press the [CANCEL] button.
1. Hold down the [FUNC] button and press the pad
[1] (COPY) .
The display will indicate "
2. Press the pad for the copy-source sample .
Pads that are available as copy sources will blink.
3. Press the copy-destination pad .
MEMO
You can also select to a different bank.
When the two pads have been pressed, the [REC] button
will blink.
4. When you press the [REC] button, the copy will
begin .
When the indication of "
peared, the copy is complete.
NOTE
• If there is not enough free memory to perform the
copy, the display will indicate "
cannot be performed.
• Never turn off the power before the copy has been
completed. Doing so will destroy the SD card.
CP Y
. "
C PY
" in the display has disap-
FU L
" and the copy
31