Cabinet/Locker Safety; Assembly Instructions - Whirlpool Gladiator Garageworks GATC5210WG Instructions D'assemblage

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
Gather the required tools and parts before starting assembly.
Tools Needed
10 mm wrench
Parts Supplied
Front bumpers (2)
Back bumpers (2)
6 mm hex-head bolts (8)
Washers (8)
Push handle
10 mm hex-head bolts (4)
2

CABINET/LOCKER SAFETY

Your safety and the safety of others are very important.

ASSEMBLY INSTRUCTIONS

Washers (4)
Drawer liners (10)
Top pad (1) or wooden top (1)
6 mm hex key
Keys (2)
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Cabinet Use Requirements
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
cabinet.
Failure to do so can result in back or other injury.
WARNING
Tip Over Hazard
A child or adult can tip the tool chest and be killed.
Open only one drawer at a time.
Firmly close and lock drawers before moving the tool
chest.
Tool chests are designed to fit together. Use tool
chests as listed in your assembly instructions.
Failure to do so can result in serious injury or death.
Intended for use in a garage.
Maximum weight limit is 1,000 lbs (454.5 kg) for the cabinet.